Browsing All Posts published on »June, 2012«

Howto configure Esxi (Configure HA and FT in ESXi)

June 26, 2012

1

Environment Two ESXi Servers = Esxi1 and Esxi2 version of Esxi Servers = 5.0 Vcenter OS = Windows2008R2(64bit) SAN = iscsi SAN attached on both Esxi Servers HA and DRS enabled ( This is a very basic setup. Both ESXi Servers have only one NIC and this is used for ISCSi SAN connectivity and also […]

Convert RHN repositories (yum) with RHEL Media DVD repository

June 25, 2012

3

Step # 1 # pwd /etc/yum.repos.d Step # 2 # vi rhel-source.repo Step # 3 You may see a result like below [rhel-source] name=Red Hat Enterprise Linux $releasever – $basearch – Source baseurl=ftp://ftp.redhat.com/pub/redhat/linux/enterprise/$releasever/en/os/SRPMS/ enabled=0 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release [rhel-source-beta] name=Red Hat Enterprise Linux $releasever Beta – $basearch – Source baseurl=ftp://ftp.redhat.com/pub/redhat/linux/beta/$releasever/en/os/SRPMS/ enabled=0 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-beta,file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release ~ Step # 4 […]

“”This program cannot display the webpage”” under Application HA tab and “”Navigation to the web page was canceled””

June 7, 2012

0

Environment Two ESXi Servers = Esxi1 and Esxi2 version of Esxi Servers = 5.0 Vcenter OS = Windows2008R2(64bit) SAN = iscsi SAN attached on both Esxi Servers HA and DRS = enabled Application HA = 5.1 SP2 Application HA OS = rhel 5.6 (64bit)   Problem Application HA tab shows “”This program cannot display the […]

Error while configuring the custom application — V-16-20081-3

June 7, 2012

0

Environment Two ESXi Servers = Esxi1 and Esxi2 version of Esxi Servers = 5.0 Vcenter OS = Windows2008R2(64bit) SAN = iscsi SAN attached on both Esxi Servers HA and DRS = enabled Application HA = 5.1 SP2 Application HA OS = rhel 5.6 (64bit) Application name = sshd   Problem I was facing the subjected […]

Blog Stats

  • 141,837 hits

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 4,963 other subscribers

Active Directory Backup is not being started backing up alternate restore failed via Netbackup Backup & Archiving Community Blog Backup and Archiving BMRERR: Received BMR error:The driver for Broadcom BCM5708S NetXtreme II GigE is not compatible with Windows PE cannot process request Cluster Server Differential incremental and cumulative incremental backup fail of Exchange Server Down arrow at Restore Microsoft Server Objects EMM status: No drives are available ERR - fatal error during enumeration for: Error 1 in Exchange Granular Backup "cannot start nbfsd" Error bpbrm(pid=139008) from client evscls: ERR - fatal error during enumeration for: Error bpbrm(pid=xxxx) no worklist items returned from bpresolver on client Error creating while establishing replication (V-39-58645-260) Error in configuring ""Exchange Server Setup wizard"" in VCS Error nbjm(pid=3908) NBU status: 830 Exchange Server2003 Backup failed with error ""none of the files in the file list exist(71)"" Exchange Task is not showing in the RSG Failed to complete the operation... V-40-49408-1: An unexpected error occured. Failed to connect to the Domain (Error V-16-15-167) how Netbackup duplicate data How Netbackup takes flat files backup which constantly open How to change secondary backup image to primary Howto check Netbackup Tape Drive status and generate a email alert once any drive down How to configure Exchange Granular Backup How to copy backup images from one media to different howto duplicate data from one media to another media howto restore from veritas secondary backup image Info bpresolver(pid=xxxx) done. status: 2: none of the requested files were backed up Status 2 invalid command parameter(20)" invalid error number(2826) Media is in use Media Server: My Image Cleanup job getting "partially successful" and sometime "invalid command parameter(20)" NetBackup netbackup backups open flat files Netbackup dns problem Netbackup does not have the service BPRD operating.(Error 25) Netbackup duplication none of the requested files were backed up(2) none of the requested files were backed up(2) and the backup failed to back up the requested files(6) none of the requested files were backed up(2) VirtualDAG PXE-E74 : Bad or missing PXE menu and/or prompt information AND PXE-E55 : ProxyDHCP service did not reply to the request on port Recovery of Catalog asking multiple paths except asking only Tape cartrige of Catalog backup requested media id is in use Restore Exchange Full Backup with Differential Incremental in Recovery Storage Group on an alternate Exchange Server Server not allowed access socket write failed(24) SQL backup is not able to view/Browse on other Netbackup Clients sql service failed to probe SQL Service not probe while Service Group creation (Notice V-16-13-131) start only the ASA Service. Windows: 6.x: \Veritas\NetBackup\bin>bpup -e ASANYs_VERITAS_NB 7.x: \Veritas\NetBackup\bin>bpup -e SQLANYs_VERITAS_NB 1.) Command line interface CLI Windows: \NetBack status: 69: invalid filelist specification invalid filelist specification(69) status code 5 Storage & Clustering Community Blog Storage and Clustering The process cannot access the file because it is being used by another process There are two methods for validating the consistency of NetBackup EMM (Enterprise Media Manager) and BMR (Bare Metal Restore) Databases. 1.) Command line interface CLI 2.) NetBackup database administr there is a question mark on the sql service service Today in my BLOG i would like to discuss the ""socket write failed(24)"" shown in the Activity Monitor in the result of a failed backup job ENVIRONMENT Server Windows 2003 Server R2 Netbackup Server 6 Unable to Create Media Server Deduplication Pool Unable to install Exchange at DR site/Secondary site V-16-13-4417 VEA "request to server has timed out" (ERROR V-39-53247-7) veritas alternate restore failed veritas sec vss writer is not working vss writer is not writing active directory backup vxdg -g [disk group] latestart on Warning bpbrm(pid=xxxx) from client backup: WRN - 'Server' service needs to be restarted for share to take effect: PATH Warning V-16-13-4273 What does "nbdelete -allvolumes -force".... Windows could not start due to an errorwhile booting from a RAMDISK..Windows failed to open the RAMDISK image World Backup Day [Error] V-126-3 'bmrprep' could not complete the requested operation