Browsing All Posts filed under »Linux«

Vyatta lost the restored data after reboot

September 15, 2012

0

Environment #show version Version:      VC6.1-2010.08.20 Description:  Vyatta Core 6.1 2010.08.20 We backed up vyatta config.boot file via the below command $ configure # save FileName The config.boot file data saved under FileName  file         (/opt/vyatta/etc/config is the PATH where config.boot file will save) suppose this vyatta machine’s hard disk crashed after few days. we created a […]

Howto switch the mode of World Call Wireless Broadband USB EVO device

July 24, 2012

1

Environment OS = Centos 6.2 Device = World Call Wireless Broadband USB EVO (snap is also attached below of device) Agenda Change the mode of the above mentioned device from Mass Storage Device to AnyDATA modem. Issue When you plugged-in the above mentioned device to your Centos 6.2 OS, it detects this device as Mass […]

(Quick) How to run remote Application/Tools on you Redhat/Centos

July 19, 2012

0

un hash the lines below and also replace no with yes under /etc/ssh/ssh_config and /etc/ssh/sshd_config file X11Forwarding yes ForwardX11 yes ForwardX11Trusted yes ForwardAgent yes Please Note: This will enable you to open the application of remote Linux Boxes on to your Linux Box. For example you can run the following applications/Tools: system-config-date system-config-printer system-config-network gedit xclock

Basic concepts when dealing with two NICs in a Replication scenerio

July 6, 2012

0

When you have two NIC’s in your system you can only give one default gateway and if you want to utilize another gateway you can use it but you use this gateway via static route command or you can use this gateway under an static route which means that you can redirect specific network IP’s […]